New S&S EZ Fuel Injection Loader. Do It Yourself And Save.

sssuperchipsYou no longer need to invest in an expensive fuel injection tuning device or spend tons of money on costly Dyno tuning. For under $200 you can own the that allows you to select and load S&S Cycle developed and Dyno proven tune files into your ECM. These calibrations were developed exclusively for S&S Step 1 (intake & exhaust) and Step 2 (Cams) Proven Performance® products.

The S&S EZ Loader is simple to use, and as your bike evolves through the S&S ‘Steps’ process, you can easily change the calibration to match your configuration.  Start with Step 1: for example the S&S Stealth air cleaner and Super Sidewinder 2-into1 exhaust. Use the S&S EZ Loader to select the parts, then the calibration, load it and go.  Down the road when you are looking for more power, move to Step 2 and install a set of S&S MR103 cams, select the calibration that matches, load it and ride!

The S&S EZ Loader comes with a USB cable and instructions, and is pre-loaded with all available S&S Step 1 & 2 calibration files (at time of production). Calibrations and firmware stored on the device can be updated anytime online*. Check out for more details. (Designed for race use only, and not legal for use on emissions controlled vehicles)


• 2011-‘14 103″ Harley-Davidson® EFI big twins with Delphi® module
• More calibrations and models being developed daily.

Features and Benefits
• Simple plug and play operation – Plug in, select the parts that are on your bike, select the calibration, save the calibration, and then load your tune file
• Automatically recognizes your vehicle model and only shows available calibration files
• Comes loaded with all available S&S Step 1 and Step 2 calibrations (However, first time users need to do a simple online setup process to configure their S&S EZ Loader and to download the latest firmware and tune files.)
• S&S calibration files adjust fuel delivery, ignition timing, and increase rev limit (Tune files for S&S Easy Start cams may also turn off factory compression releases if needed)
• Automatically downloads latest calibrations when plugged into your computer* 
• New calibration and firmware updates available online*

Bonus Functions
• Read and clear error codes 
• Re-calibrate your speedometer